| Customization: | Available |
|---|---|
| Application: | High-performance Transducer, Three Phase Transducer, General Transducer, Single-phase Transducer, High Frequency Converter Transducer |
| Output Type: | Triple |
|
Still deciding? Get samples of US$ 90/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
|
Category |
Terminal Symbol |
Terminal Na |
Ternimal Function |
| Power Supply | 24V | 24V power supply | It provides the power of 24V±10% and maximum current of 200mA It functions as the working power supply of digital input and output or externally connects to the sensor power supply. |
| COM | Common terminal | ||
| Digital Input | S1 | Forced switch to mains | Terminal feature parameters: 1. Internal impedance: 3.3kΩ 2. Acceptable votage input:12 -24V 3. Maximum input frequency 1kHz S1: Forcible switch to mains(Switch-on indicates switching to mains, ans switching-off indicates input controlled by the switching keypad) S2: It connects to the high-water switch of the normally open contact by default. S3: It connects to the low-water switch of the normally closed contact. S4: A high electrical level corresponds to the single-phase algorithm. A low electrical level corresponds to the two phase algorithm. |
| S2 | Full-water alarm | ||
| S3 | Empty-water alarm | ||
| S4 | Single/two phase algorithm | ||
| Communication | RS485+ PS485- |
485 communication | 485 communication ternimals, using the ModBus protocol |
| 422TX+ 422TX- 422RX+ 422RX- |
422 communication | Communication terminals special for teh boost module | |
| Relay Ouput | RO1A (ROA) |
Normally open contact of relay 1 | 1. Contact capacity: 3A/AC250V, 1A/DC30V 2. They cannot be used for high frequency switch ouput. During the application of auto mains & PV switching , the AC input contactor coil is controlled by the normally closed contact of the relay. |
| RO1B (ROB) |
Normally closed contact of relay 1 | ||
| RO1C (ROC) |
Common terminal of relay 1. |
1. Start or sleep automatically only after being connected to solar panel without setting any parameter
2. Include PV over-voltage protection, PV polarity reverse warning
auto - derating against over - temperature etc, extending product's life.
3. Ensure the solar power tracking efficiency reaches 99%.
keep frequency output stable without any faults and stop even though the solar power is unstable.
4. Models of 2.2kw or less can be configured with the boost module.
which can reduce the cost by decreasing the number (Up to 13 pieces) of solar panel.
5. Implement auto switch or hybrid function between solar input and grid input, achieving 24-hour unattended work.
6. Support GPRS module, which can remotely monitor the inverter by using the APP.
| Sales points | Details |
| 1 | Solar pumping system can provide water for remote areas lacking of electricity or places where the electricity supply is unstable. |
| 2 | Solar pump Inverter can convert the DC power from solar panels to AC power so to drive various kinds of pumps. |
| 3 | Solar pumping Inverter System enables continuously pumping when in good weather. System is not equipped with storage battery devices, it is suggested that pumping the water to conservation pool for future use.Water source could come from river, lake,well,or other natural water source or special source. |
| 4 | System enables application of floating switch in the conservation pool or water tower to control the operation of pumps. Low water level probes can be installed in the well to detect the water level of the well in order to stop the pumps when the well in low water level. |
| 5 | Use the GPRS MODEL, u can see the every performance from your computer. |
| 6 | Direcly connect with solar panel or AC power, energy saving and operation automation. |
| IGBT | STARPOWER/ INFINEON/FUJI/CHINESE BRAND |
| FAN | PELKO/NIDEC/OTHER CHINESE BRAND |
| CAPACITORS | RUBYCON/JIANGHAI |
| ELECTRONIC | DELTA |
| FOB | SHANGHAI/NINGBO |
| 1to 50 pcs/ month | 90 USD |
| 500 pcs/month | 80 USD |
){kind=link}